China wholesale Aluminum Copper Master Alloys - Aluminum copper master alloy AlCu50 – Xinglu
China wholesale Aluminum Copper Master Alloys - Aluminum copper master alloy AlCu50 – Xinglu Detail:
Aluminum copper master alloy AlCu50
Master alloys are semi-finished products, and can be formed in different shapes. They are pre-alloyed mixture of alloying elements. They are also known as modifiers, hardeners, or grain refiners based on their applications. They are added to a melt to achieve the disired result. They are used instead of a pure metal because they are very economical and save energy and production time.
Product Name | Aluminum copper master alloy | |||||||||||||
Standard | GB/T27677-2011 | |||||||||||||
Content | Chemical Compositions ≤ % | |||||||||||||
Balance | Si | Fe | Cu | Mn | Cr | Ni | Ti | Zn | Pb | Sn | Mg | Other Single | Total Impurities | |
AlCu40 | Al | 0.40 | 0.45 | 38.0~42.0 | 0.10 | 0.10 | 0.10 | 0.10 | 0.30 | 0.05 | 0.05 | 0.10 | 0.05 | 0.15 |
AlCu50 | Al | 0.40 | 0.45 | 48.0~52.0 | 0.35 | 0.10 | 0.20 | 0.10 | 0.30 | 0.05 | 0.05 | 0.20 | 0.05 | 0.15 |
AlCu60 | Al | 0.30 | 0.30 | 57.0~63.0 | 0.05 | 0.10 | 0.05 | 0.05 | 0.10 | 0.05 | 0.05 | 0.05 | 0.05 | 0.15 |
Applications | 1. Hardeners: Used for enhancing physical and mechanical properties of metal alloys. 2. Grain Refiners: Used for controlling the dispersion of individual crystals in metals to produce a finer and more uniform grain structure. 3. Modifiers & Special Alloys: Typically used to increase strength, ductility and machinability. |
|||||||||||||
Other Products | AlMn, AlTi, AlNi, AlV, AlSr, AlZr, AlCa, AlLi, AlFe, AlCu, AlCr, AlB, AlRe, AlBe, AlBi, AlCo, AlMo, AlW, AlMg, AlZn, AlSn, AlCe, AlY, AlLa, AlPr, AlNd, AlYb, AlSc, etc. |
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" would be the persistent conception of our corporation to the long-term to establish collectively with customers for mutual reciprocity and mutual benefit for China wholesale Aluminum Copper Master Alloys - Aluminum copper master alloy AlCu50 – Xinglu, The product will supply to all over the world, such as: Madras, Swansea, luzern, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Marcie Green from Florida - 2017.04.18 16:45
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
By Dora from Costa Rica - 2018.02.21 12:14