AlTi10 ingot Master alloy titanium alùmanum
AlTi10 a-steach Prìomh alloy titanium alùmanum
Tha prìomh alloys nan toraidhean leth-chrìochnaichte, agus faodar an cruthachadh ann an diofar chumaidhean. Tha iad nan measgachadh ro-alloyed de eileamaidean alloying. Tha iad cuideachd air an ainmeachadh mar luchd-atharrachaidh, luchd-cruaidh, no luchd-glanaidh gràin stèidhichte air na tagraidhean aca. Bidh iad air an cur ri leaghadh gus an toradh mì-thoilichte a choileanadh. Bidh iad air an cleachdadh an àite meatailt fìor-ghlan oir tha iad gu math eaconamach agus a’ sàbhaladh lùth agus ùine toraidh.
Ainm toraidh:Prìomh alloy titanium alùmanum
Giorrachadh:Al-Ti master alloy
Ainm eile: Prìomh alloy titanium alùmanum, prìomh alloy titanium alùmanum, prìomh alloy AlTi
Susbaint:AlTi10
Puing leaghaidh: 1020-1070 ° C
Foirmean: Leac, waffle, ingot, cnapan, msaa
| Ainm toraidh | Titanium alùmanummhaighstir alloy | ||||||||||||||||
| Inbhe | GB/T27677-2011 | ||||||||||||||||
| Susbaint | Stuthan ceimigeach ≤ % | ||||||||||||||||
| Cothromachadh | Si | Fe | Cu | Mn | Cr | Ni | Ti | B | V | Zn | Pb | Sn | Mg | C | Singilte Eile | Impurities iomlan | |
| AlTi3 | Al | 0.30 | 0.35 | / | / | / | / | 2.5~3.5 | / | / | / | / | / | / | / | 0.05 | 0.15 |
| AlTi4 | Al | 0.20 | 0.30 | / | / | / | / | 3.5 ~ 4.5 | / | / | 0.10 | / | / | / | / | 0.05 | 0.15 |
| AlTi5 | Al | 0.50 | 0.45 | 0.15 | 0.35 | 0.10 | 0.10 | 4.5~5.5 | / | 0.25 | 0.15 | 0.10 | 0.10 | 0.50 | / | 0.05 | 0.15 |
| AlTi6 | Al | 0.30 | 0.35 | / | / | / | / | 5.5~6.5 | 0.004 | 0.30 | / | / | / | / | / | 0.03 | 0.10 |
| AlTi10 | Al | 0.30 | 0.35 | / | / | / | 0.05 | 9.0 ~ 11.0 | 0.004 | 0.50 | / | / | / | / | / | 0.03 | 0.10 |
| AlTi6A | Al | 0.20 | 0.20 | / | / | / | / | 5.5~6.5 | 0.004 | 0.20 | / | / | / | / | / | 0.03 | 0.10 |
| AlTi10A | Al | 0.20 | 0.20 | / | / | / | 0.05 | 9.0 ~ 11.0 | 0.004 | 0.20 | / | / | / | / | / | 0.03 | 0.10 |
| AlTi 12 | Al | 0.30 | 0.30 | / | / | 0.10 | 0.10 | 11.0 ~ 13.0 | / | 0.50 | / | / | 0.10 | / | / | 0.10 | 0.15 |
| AlTi15 | Al | 0.30 | 0.30 | / | / | 0.15 | 0.15 | 14.0 ~ 16.0 | / | 0.50 | / | / | 0.15 | / | / | 0.10 | 0.15 |
| AlTi3B1 | Al | 0.20 | 0.30 | / | / | / | / | 2.8 ~ 3.4 | 0.7 ~ 1.1 | / | / | / | / | / | / | 0.03 | 0.10 |
| AlTi5B0.2 | Al | 0.30 | 0.35 | / | / | / | / | 4.5~5.5 | 0.15~0.25 | 0.25 | / | / | / | / | / | 0.03 | 0.10 |
| AlTi5B0.2A | Al | 0.15 | 0.20 | / | / | / | / | 4.5~5.5 | 0.15~0.25 | 0.20 | / | / | / | / | / | 0.03 | 0.10 |
| AlTi5B0.2B | Al | 0.30 | 0.40 | / | / | / | / | 4.5~5.5 | 0.1~0.5 | 0.20 | / | / | / | / | / | 0.03 | 0.10 |
| AlTi5B0.6A | Al | 0.20 | 0.30 | / | / | / | / | 4.5~5.5 | 0.5~0.7 | / | / | / | / | / | / | 0.03 | 0.10 |
| AlTi5B0.6 | Al | 0.20 | 0.30 | / | / | / | / | 4.5~5.5 | 0.5~0.7 | 0.20 | / | / | / | / | / | 0.03 | 0.10 |
| AlTi5B1 | Al | 0.20 | 0.30 | / | / | / | / | 4.5~5.5 | 0.8 ~ 1.2 | 0.20 | / | / | / | / | / | 0.03 | 0.10 |
| AlTi5B1A | Al | 0.15 | 0.20 | / | / | / | / | 4.8~5.2 | 0.9~1.1 | 0.05 | / | / | / | / | / | 0.03 | 0.10 |
| AlTi5B1B | Al | 0.20 | 0.25 | / | / | / | / | 4.5~5.5 | 0.8 ~ 1.2 | 0.10 | / | / | / | / | / | 0.03 | 0.10 |
| AlTi5B1C | Al | 0.20 | 0.30 | / | / | / | / | 4.5~5.5 | 0.4~1.2 | 0.20 | / | / | / | / | / | 0.03 | 0.10 |
| AlTi3C0.15A | Al | 0.20 | 0.20 | / | / | / | / | 2.6~3.4 | 0.004 | 0.05 | / | / | / | / | 0.08~0.22 | 0.03 | 0.10 |
| AlTi3C0.15 | Al | 0.30 | 0.15 | / | / | / | / | 2.6~3.4 | 0.004 | 0.30 | / | / | / | / | 0.08~0.22 | 0.03 | 0.10 |
| AlTi3C0.3 | Al | 0.20 | 0.20 | / | / | / | / | 2.6~3.4 | 0.004 | 0.05 | / | / | / | / | 0.25~0.35 | 0.03 | 0.10 |
| Iarrtasan | 1. Hardeners: Air a chleachdadh airson a bhith ag àrdachadh feartan fiosaigeach agus meacanaigeach alloidhean meatailt. 2. Grain Refiners: Air a chleachdadh airson smachd a chumail air sgaoileadh criostalan fa leth ann am meatailtean gus structar gràin nas grinne agus nas èideadh a thoirt gu buil. 3. Modifiers & Sònraichte Alloys: Mar as trice air a chleachdadh gus meudachadh neart, ductility agus machinability. | ||||||||||||||||
| Bathar Eile | AlMn,AlTi,AlNi,AlV,AlSr,AlZr,AlCa,AlLi,AlFe,AlCu, AlCr,AlB, AlRe,AlBe,AlBi, AlCo,AlMo, AlW,AlMg, AlZn, AlSn,AlCe,AlY,AlLa, AlPr, AlNd, AlYb,AlSc, etc. | ||||||||||||||||
Teisteanas:
Dè as urrainn dhuinn a thoirt seachad:
