I-aluminiyam inkosi yentsimbi ingxubevange AlFe10

Inkcazelo emfutshane:

I-aluminiyam inkosi yentsimbi ingxubevange AlFe10
Isetyenziselwa ukuphucula iimpawu zomzimba kunye noomatshini beealloys zetsimbi.
Isetyenziselwa ukulawula ukusasazwa kweekristale ezizimeleyo kwiintsimbi ukuvelisa ulwakhiwo olusulungekileyo nolufanayo lwenkozo.
Ngokuqhelekileyo isetyenziselwa ukunyusa amandla, i-ductility kunye ne-machinability.


Iinkcukacha zeMveliso

Iithegi zeMveliso

I-aluminiyam ye-iron master ingxubevange AlFe10

I-master alloys yimveliso egqityiweyo, kwaye inokwakheka ngeendlela ezahlukeneyo. Ziyingxubevange yangaphambili ye-alloying elements. Zikwabizwa ngokuba zizilungisi, iihardeners, okanye izisulungesi zengqolowa ngokusekwe kwizicelo zazo. Ziye zongezwa kwi-melt ukufezekisa umphumo ongathandekiyo. Zisetyenziselwa endaweni yentsimbi ecocekileyo kuba zinoqoqosho kakhulu kwaye zigcina amandla kunye nexesha lokuvelisa.

Igama lemveliso Intsimbi yeAluminiyami-alloy master
Umgangatho I-GB/T27677-2011
Umxholo Ukuqulunqwa kwemichiza ≤ %
Ibhalansi Si Fe Cu Mn Cr Ni Ti Zn Pb Sn Mg Omnye Ongatshatanga Ukungcola ngokupheleleyo
AlFe5 Al 0.40 4.0~6.0 0.15 0.35 0.10 0.10 0.10 0.10 0.15 0.10 0.40 0.05 0.15
AlFe10 Al 0.25 9.0~11.0 0.10 0.10 / / / 0.10 / / / 0.05 0.15
AlFe20 Al 0.20 18.0~22.0 0.10 0.30 / / / 0.10 / / / 0.05 0.15
Usetyenziso 1. I-Hardeners: Isetyenziselwa ukunyusa iimpawu zomzimba kunye noomatshini bee-alloys zetsimbi.
2. Izisulungesi zeenkozo: Zisetyenziselwa ukulawula ukusasazwa kweekristale ezizimeleyo kwiintsimbi ukuvelisa ubume obusulungekileyo kunye nobufanayo obufanayo.
3. IiModyuli kunye nee-Alloys eziKhethekileyo: Ngokuqhelekileyo zisetyenziselwa ukunyusa amandla, i-ductility kunye ne-machinability.
Ezinye iimveliso AlMn,AlTi,AlNi,AlV,AlSr,AlZr,AlCa,AlLi,AlFe,AlCu, AlCr,AlB, AlRe,AlBe,AlBi, AlCo,AlMo, AlW,AlMg, AlZn, AlSn,AlCe,AlY,AllLa, AlPr, AlNd, AlYb,I-AlSc, njl.

 

Isatifikethi:

5

Yintoni esinokubonelela ngayo:

34

 


  • Ngaphambili:
  • Okulandelayo:

  • Iimveliso ezinxulumeneyo